FAQ

• Yes! We designed Mr. Pecker® kit to be skin-safe and body safe. The Mr. Pecker® Magic Mix™ is a liquid casting mix Made in the USA from brown algae, kelp, and a few other elements. This amazing mix is used by artisans, crafters, medical professionals and Hollywood special effects masters to create anything from art to life-like castings, and special effects. This is the mix that you insert your pecker into to make the mold.

• Warning: Do not ingest or eat. Keep away from pets and children. Seek immediate medical attention if ingested. 

• LAB TESTS (Magic Mix™) - Substances No ingredients are hazardous according to Regulation 2012 OSHA Hazard Communication Standard 29 CFR 1910.1200 criteria.  TEST RESULTS: The test article is classified as a non-irritant. California Proposition 65 This product does not intentionally contain any chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.  

2. Is there latex in this kit?

• No. There is no latex in this product in case you might be skin sensitive to it.

3. What if my pecker is curved?

• We created Mr. Pecker® to fit all shapes and sizes. We specifically created our patent pending Cloning Tube™ to adjust to about any length and direction your pecker goes. You can easily flex the Cloning Tube™
  right, left, up, down, and all around. A perfect for fit for just about all pecker shapes and sizes. It extends to 12" and when collapsed is 4" with a 3" diameter. 

4. What is the Cloning Mix™ made out of? 

• The Cloning Mix™ is made out of 100 % Platinum-Cure Silicon and is skin and body-safe when properly mixed in a 1:1 ration and cured for a minimum of 60 minutes. This product is intended to make an artistic clone of a pecker that looks and feels lifelike. The final result feels soft to the touch & has great detail. To help keep your dildo fresh and clean consider using a condom and definitely wash it after every use with warm water and soap.

• LAB TESTS: 1 Classification of the substance or mixture are Not a hazardous substance or mixture according to United States Occupational Safety and Health Administration (OSHA) Hazard Communication Standard (29 CFR 1910.1200), the Canadian Workplace Hazardous Materials Information System (WHMIS) and Regulation (EC) No 1272/2008 and subsequent amendments.  3.1 Substances No ingredients are hazardous according to Regulation 2012 OSHA Hazard Communication Standard 29 CFR 1910.1200 criteria. SKIN SAFETY TEST RESULTS:  TEST RESULTS: The test article submitted has passed and is classified as a non-irritant in accordance with the OECD Guideline for the Testing of Chemicals No. 439.  California Proposition 65 This product does not intentionally contain any chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.

• Warning: Do not ingest or eat. Keep away from pets and children. Seek immediate medical attention if ingested. This is a novelty item. This item is for ages 18+ only.

5. Do I need to shave my pubes? 

• Trimming your pubes would be advised to get as much of the shaft of your pecker into the tube as possible. Use a water based lubricant to get hard to help with the casting process. Don't use silicone lube.

6. How long will it take me to make a clone of my Pecker?

• From start to finish it might take about 1 1/2 hours tops. The casting and cloning process only takes about 10 minutes. The longest time is just letting your clone set. That takes 75 minutes. So from when you set up, read the directions, and get hard to when your clone is ready, it will take about 1 1/2 hours for the fastest result. 

7. Do you ship internationally? 

• No, not at this time. 

8. Is shipping Discreet? 

• Yes, shipping is discreet. Each Mr. Pecker kit comes in a plain unbranded box with the return name as Think Labs Global on top. 

9. Is Mr. Pecker messy to make?

• It can get a little messy. Never use over carpet. Use this kit only over a solid surface such as tile and put newspaper or plastic bags down for a workspace to keep everything clean. The mix cleans up easy on solid surfaces with a wipe and soapy warm water. The mix will stain if spilled when not cured. 

10. How long will my kit last if I haven't opened it? 

• Your kit will last about 6 months to 1 year if unopened from the date of purchase and if kept in a temperature controlled environment at 70f-75f.